Removing and Installing Firewall Bearing for Accelerator Pedal Lever - ra300c6023022x(3022)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
C. Engine 603.97 in Model 140
Preceding work:
Operation no. of operation texts and work units or standard texts and flat rates: 30-3022
C. Model 140
| Cover below instrument panel | remove, install. |
| Spreader bolt (251) | push out, push in. |
| Return spring (235) | detach, attach. |
| Bowden cable | take off from the accelerator pedal lever (233), fit on. To do this, take off plate (223), fit on. |
| Locking plate (220) at pin of firewall slacken, attach. bearing (248) | |
| Accelerator pedal lever (233) | pull off, push on. |
| Bolts (218) | unscrew at firewall bearing, screw in. |
| Firewall bearing (248) | take off, fit on. |
| Coupling for idle speed contact switch (arrow) | unplug, plug together. |
| Accelerator control | check, adjust if necessary (30-1010 ). |