Checking cylinder head bolts - AR01.30-P-5800-03HA
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Test values for cylinder head bolts
| Number | Designation | Engine 602.982/983 | ||
|---|---|---|---|---|
| BE01.30-N-1001-01A | Cylinder head bolt | Thread diameter | M | 10 |
| Length (L) when new | mm | 80/102/115 | ||
| Length (L) | mm | ≤83.6/105.6/118.6 | ||
| Fig. see | AR01.30-P-5800-03HA | |||
Cylinder head/cylinder head bolts
| Number | Designation | Engine 601, 602 except 602.98, 603 | Engine 604, 605, 606 | ||
|---|---|---|---|---|---|
| BE01.30-P-1001-04A | Cylinder head bolt | Thread diameter | M | 10 | 10 |
| Length (L) when new | mm | 80/102/115 | 102/115 | ||
| max. length (L) | mm | 82/104/117 | 104/117 | ||
| Fig. see | - | AR01.30-P-5800-03HA | |||
Cylinder head/cylinder head bolts
| Number | Designation | Engine 111 | Engine 271 | ||
|---|---|---|---|---|---|
| BE01.30-P-1001-04B | Cylinder head bolt | Thread diameter | M | 12 | 10x1.5 |
| Length (L) when new | mm | 102 | 165 | ||
| Length (L) | mm | ≤105 | 167, 5 | ||
| Fig. see | AR01.30-P-5800-03HA | - | |||
Measure length (L), if length (L) is greater than the maximum permissible dimension, use new cylinder head bolts.