Widening camshaft bearing bores (repair size) - RA01001044190X(01-4190)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

DATA IN MM

Standard size	Camshaft	29.947
		29.963
	Cylinder head	30.000
		30.021
Repair size	Camshaft	30.434
		30.450
	Cylinder head	30.500
		30.525
Camshaft bearing bores	Peak-to-valley height	0.001 - 0.004
Permissible difference in shape of cylinder		0.012
Permissible misalignment of 1st and 7th bearing bore		0.040
Bearing play	radial	0.035
	axial	0.06 - 0.21

NOTE: If bearing seizing or severe scoring is present, the camshaft bearing bores can be widened by 0.5 mm and a camshaft with oversized bearing journals installed.

Code number of this camshaft see (05-2200) .

When performing repairs, camshafts with an oversize of +0.5 mm should be used for reconditioned engines with +0.5 mm camshaft bearing bores.