Camber Link: Removal
WARNING: This page is about a different car, the 1994 Mercedes-Benz C280 and 1994 Mercedes-Benz C220. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Remove camber link-to-axle carrier bolt. See Figure. Remove camber link-to-wheel carrier bolt. Remove recess washer and disk. Press camber link clamping sleeve from wheel carrier.
- While pulling slightly outward on wheel carrier, remove camber link at axle carrier. Replace camber link assembly if rubber mounts are worn or damaged.