Removing and installing paneling on A-pillar - AR68.30-P-4050E

MODEL 202 

Fig 1: Identifying Paneling On A-Pillar Remove/Install Components - Model 202

	Removal, installation
1	Pull off edge guard in area of A-pillar paneling
2	Press paneling (1) off of retaining clips (3) with installation wedge		Figure
3	Slide paneling (1) inward at bottom and pull out of paneling (2) at top.	Install paneling (1) without gap between instrument panel and paneling (1).
4	Install in opposite order

Special tools 

Fig 2: Identifying Long Wedge (115 589 03 59 00)