Removing and installing front floor covering (on right) - AR68.20-P-2070F
MODEL 210
| Removal, installation | |||
| 1 | Pull cover (1) on longitudinal member upwards (3 clips) and pull off edge guard (10) in area of paneling (5) | ||
| 2 | Press out cover (2) and unscrew screw (3) | ||
| 3 | Unclip clips (4, 2 each) and remove paneling (5) towards rear | ||
| 4 | Turn plastic screw (6) 90° and remove cover (7, footwell air outlet) | ||
| 5 | Lift floor covering (8) at rear and remove | ||
| 6 | Reinstall in opposite order |