Remove/install rain sensor - AR82.30-P-7700F

MODELS 129,202 as of 1.6.97,208, 210 with CODE (345a) Rain sensor

Shown on Model 210

Fig 1: Identifying Rain Sensor Components Location - Model 210

Modification notes

11.4.03

Disconnecting ground lead from battery newly included

Step 1

	Remove/Install
1	Disconnect ground cable of battery		AR54.10-P-0003A
2	Remove cover (1)
3	Release retaining clamps (2) from rain sensor (B38) on left and right
4	Remove rain sensor (B38)	Lens (3) of rain sensor (B38) is bonded to the windshield and may not be removed, otherwise this damages the lens (3).
5	Separate electrical connector at rain sensor (B38)
6	Install in the reverse order
7	Check for proper function