Removing and installing rear axle damper valve - AR32.31-P-0680A
MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control
| Illustration item., etc. | Operating notes | ||
|---|---|---|---|
| Risk of injury to skin or eyes due to hydraulic fluid spraying out under high pressure. Risk of poisoning due to consuming hydraulic fluid. | Before starting work on the hydraulic system, depressurize the system. Wear protective clothing and safety glasses. | AS00.00-Z-0013-01A | |
| Safety regulations for working on level control/ADS | AH32.00-P-0001-01A | ||
| Empty, fill pressure oil system of rear axle | AR32.31-P-0630A | ||
| P4 | Pressure lines | Disconnect at the damper valves (Y53, Y54). | |
| *BA32.31-P-1001-07A | |||
| Y51, Y52 | Damper valve | Detach at bracket, disconnect electrical connector. | |
| *BA32.31-P-1002-07A | |||
| *BA32.31-P-1003-07A |
| Number | Designation | Model 129 with electronic level control / ADS II | ||
|---|---|---|---|---|
| BA32.31-P-1001-07A | ADS pressure line to damper valve (reference value) | M16x1.5 | Nm | 30 |
| M18x1.5 | Nm | 44 | ||
| BA32.31-P-1002-07A | Self-locking bolt of left damper valve on bracket | M8 | Nm | 24 |
| BA32.31-P-1003-07A | Self-locking nut of right damper valve on bracket | M8 | Nm | 14 |