Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9129AA
MODEL 129
| General information on vehicle level measurement | MODEL 129, 140, 163, 168, 169, 170, 171, 202, 203, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 245... | AR40.00-P-0202A | |
| Replace tires | MODEL 124, 129, 140, 163, 164, 168, 170, 171, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240, 414... | AR40.10-P-1030A | |
| Balance wheels | MODEL 124, 129, 140, 163, 168, 170, 171, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240, 414... | AR40.10-P-1040A | |
| Perform chassis alignment check | MODELS 129, 140, 163, 170, 202, 208, 210 | AR40.20-P-0200A | |
| General information on chassis alignment | MODEL 129, 140, 163, 170, 202, 208, 210 | AR40.20-P-0201A | |
| Attaching Mercedes-Benz quick-clamping devices | MODEL 129, 140, 163, 170, 171, 202, 203, 208, 210 | AR40.20-P-0230A | |
| Checking vehicle level at front and rear axles | MODEL 129, 170, 202, 208... | AR40.20-P-0300A | |
| Checking vehicle level at front and rear axles | MODEL 129 with CODE (216b) adaptive damping system (ADS) with level control | AR40.20-P-0300D | |
| Checking vehicle level at front and rear axles | MODEL 129 with CODE (216c) adaptive damping system (ADS II) with electronic level control | AR40.20-P-0300E | |
| Check ball point position | MODELS 129, 140, 170, 202, 208 | AR40.20-P-0320A | |
| Adjusting ball point position | MODEL 129 | AR40.20-P-0321A | |
| Checking and adjusting camber and caster of front wheels | MODEL 129 | AR40.20-P-0322A | |
| Check and adjust front axle toe-in | MODEL 129 | AR40.20-P-0323A | |
| Checking toe-out on turns | MODEL 129, 140, 163, 170, 202, 208, 210 | AR40.20-P-0325A | |
| Checking rear axle camber | MODEL 129, 140, 170, 202, 208, 210 | AR40.20-P-0331A | |
| Check and adjust toe on rear axle | MODEL 129, 140, 170, 202, 208, 210 | AR40.20-P-0332A | |
| Check accidents vehicles and vehicles in which accident damage is suspected | MODEL 129, 140, 163, 170, 202, 208, 210, 215, 220 | AR40.30-P-0400A | |
| Preparations for dimensional and comparative measurement | MODEL 129, 140 | AR40.30-P-0401A | |
| Carry out distance and comparison measurements on front and rear axles | MODEL 129, 170, 202, 208 | AR40.30-P-0402A | |
| Measuring rear axle carrier (when removed) | MODELS 129, 170, 202, 208, 210 | AR40.30-P-0410A | |
| Measuring spring link, camber arm, radius rod, thrust arm and track rod of rear axle | MODEL 129, 170, 171, 202, 203, 209.3 /4, 208, 210 | AR40.30-P-0420A | |
| Measuring wheel carrier (when removed) | MODEL 129, 170, 171, 202, 203, 208, 209.3 /4, 210 | AR40.30-P-0425A | |
| Measuring steering knuckle | MODEL 129 | AR40.30-P-0451A | |
| Measuring lower wishbone (when removed) | MODEL 129 up to 1.10.93, 140 | AR40.30-P-0452A |