Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9129AA
MODEL 129
| Removing and installing complete rear axle | MODEL 129 | AR35.10-P-0010C | |
| Removing, installing front and rear rubber mount of rear axle mount | MODEL 129 | AR35.10-P-0040C | |
| Removing, installing rear rubber mount for center assembly mount in rear axle carrier | MODEL 129 | AR35.10-P-0050C | |
| Remove/install camber strut | MODELS 129, 170, 202, 208, 210 | AR35.20-P-0110B | |
| Remove/install radius rod | MODELS 129, 170, 202, 208, 210 | AR35.20-P-0111B | |
| Remove/install tie rod and replacement of rubber mount | MODELS 129, 170, 202, 208, 210 | AR35.20-P-0112B | |
| Remove/install torque strut | MODELS 129, 170, 202, 208, 210 | AR35.20-P-0113B | |
| Remove/install spring link, replace rubber mount | MODELS 129, 170, 202, 208, 210 | AR35.20-P-0114B | |
| Remove/install wheel carrier | Model 129, 170, 202, 208, 210 | AR35.20-P-0115B | |
| Removing, installing supporting joint at wheel carrier (wheel carrier installed) | MODEL 129, 170, 202, 208, 210 | AR35.20-P-0116B | |
| Remove/install rear axle shaft flange and angular ball bearing | MODEL 129, 170, 202, 203, 209.3 /4, 208, 210 | AR35.20-P-0130B | |
| Remove/install rear axle shaft | MODEL 129, 140, 170, 202, 203, 208, 209, 210... | AR35.30-P-0620A | |
| Remove/install inside CV joint or rubber boots on rear axle shaft | MODEL 129, 140, 170, 202, 203, 208, 209, 210, 215, 220... | AR35.30-P-0660A | |
| Bleeding ASD hydraulic system | MODEL 129, 202 up to 31.5.94 with CODE (211a) Rear axle with automatic locking differential (ASD) | AR35.41-P-0519C | |
| Repairing ASD ring cylinder | MODEL 124, 129, 201, 202... | AR35.41-P-0545C | |
| Repairing ASD ring cylinder | MODEL 124, 129, 140... | AR35.41-P-0545D | |
| Dismantling and assembling ASD differential | MODEL 124, 129, 140, 201, 202... | AR35.41-P-0560C |