Programming control module for TELE AID emergency call system - AR82.95-P-0005-02A

Prerequisites: 

Vehicle must be located outdoors.

GPS and GSM reception must be present!

Procedure: 

1. Read out vehicle data with HHT and write down.
2. Remove SIM card from handset (if present).
3. Ignition: OFF.
4. Ignition: On or switch on telephone.
5. Enter PIN for Telematik SIM on handset and export to TELE AID control module (see Operating instructions):
6. Connect DAS (Star diagnosis) to vehicle and select model "129".
7. Select menu "Information/Communication".
8. Select TELE AID or E-Call emergency call systems.
9. Select menu "Adapt control modules".
10. Select "Read coding, change if required".
11. Select model "140".
12. Code emergency call (only if required).
13. Enter airbag control module part number.
14. Set D2B to "not present".
15. Transfer coding data to control module.
16. Enter chassis number VIN.
17. Quit DAS (Star diagnosis).
18. Enter vehicle data into new TELE AID control module with HHT.
19. Authorize emergency call system with provider (see Operating instructions).