Removing and installing intake air scoop - AR09.10-P-8221D

ENGINES 104.941/942/943/944/991/992/994 

Model 124, 1st version 

Fig 1: Identifying Intake Air Scoop - Model 124, 1St Version

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 124, 2nd version 

Fig 2: Identifying Intake Air Scoop - Model 124, 2nd Version

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 129 

Fig 3: Identifying Intake Air Scoop - Model 129

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 140 

Fig 4: Identifying Intake Air Scoop - Model 140

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 202 

Fig 5: Identifying Intake Air Scoop - Model 202

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig. item, etc.	Work instructions
	Remove right headlamp unit, install	Model 124, 2nd version See RI Electrical System III Model 124, Op. no. 82-4730
	Remove radiator trim, install	Model 202 See RI Body Removal and Installation II Model 202, Op. no. 88-4000
4/22	Splash guard	pay attention to installed position
4/4	Intake air scoop	remove