Removing and installing paneling on rear center piece - AR68.30-P-4785A

MODEL 202.07/08/18 

Fig 1: Identifying Paneling On Rear Center Piece Remove/Install Components - Model 202.07/08/18

	Removal, installation
1	Fold up spare wheel cover and pull out toward rear
2	Pull cover (2) toward rear out of paneling (1)
3	Remove expanding anchors (3)
4	Pull paneling (1) up and out	Installation:  Insert arresting lugs (arrows) into rear wall and ensure the rubber gasket is correctly seated
5	Reinstall in opposite order