Removing and installing telescope of automatic antenna - AR82.62-P-8200EA

MODEL 129 

MODEL 202.01 /02 /12 with CODE (531) Automatic antenna 

MODEL 202.01 /02 /12 with CODE (538) Automatic antenna and front loudspeakers - without radio 

Illustrated on model 202 

Fig 1: Identifying Removing And Installing Telescope Of Automatic Antenna - Illustrated On Model 202

	Removal
1	Unscrew securing nut (74)
2	Have radio switched on by second person and pull out extending telescope (75) with plastic cable (76)
	Installation
3	Insert plastic cable (76) with the splines in opposite direction of travel
4	Have 2nd person switch off radio
5	Retract plastic cable (76) and telescope (75) fully
6	Screw on securing nut (74)
7	Perform operational check