Disconnecting and connecting plug connector - AR27.10-P-0500-01A

HOUSING

Number	Designation		Transmission 722.6 except 722.660/661/662/663/666/674
BA27.40-P-1014-01A	Bolt, heat shield to transmission housing	Nm	6

Unscrew bolt (62a) .
Undo bolt (62b)
Remove heat shield (62)
Heat shield (62) not installed on model 463.

Fig 1: Identifying Heat Shield And Bolts
Turn bayonet fitting of pilot bushing (21) 90° to the left and detach electrical connector (26).
Replace O-ring of electrical connector (26).
Install in the reverse order.

Fig 2: Identifying Pilot Bushing And Electrical Connector