LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Doors & Windows - 140 Chassis) >> Testing & Repair >> Removal and installation of the door pocket - ra72001400150x(0150)

Removal and installation of the door pocket - ra72001400150x(0150)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140 

Preliminary work:

Door covering removed (Removal and installation of the lining on the driver's door  )

Fig 1: Identifying Door Pocket Components
G05437640Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Door covering (9) lay down on suitable surface.
Nuts (7) screw off (6 each).
Wooden trim strip (8) remove.
Clips (1) pull out (6 each).
Screws (2) screw out (6 each).
Reinforcement panel (10) remove.
Nuts (3 and 4) screw off (2 each).
Insulating tape (arrow) pull off.
Air baffle (5) and door pocket (6) remove, pay attention to three attachment hooks when installing!
Reinstall in opposite order.