Aligning windshield in body opening - AR67.10-P-1000-04D
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TEST AND ADJUSTMENT VALUES WINDSHIELD
| Number | Designation | Models 140.02/03/04/05/13 | Model 140.06/07 | |
|---|---|---|---|---|
| BE67.10-P-1001-01A | Distance between top of windshield and front edge of roof | Dimension" mm A" | 11 | 8 |
| See figure | AR67.10-P-1000-04D | AR67.10-P-1000-04D | ||
- Before applying the adhesive, fit windshield (a) onto rubber windshield spacers and center.
Observe dimension "A", measured between top of window and front edge of roof.
The distance from the side edge to the clip should not be too slight, because otherwise, the window can be damaged when installing the molding.
- Apply strips of tape (arrows), cut through at top of window and remove window.