Cutting out rear window with cutter - AR67.20-P-2000-02DC
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
| Risk of injury from knife slipping off when clamping it in the multicutter and from glass splinters when cutting out bonded windows | Clamp/unclamp blade only with air supply shut-off. Wear protective gloves and goggles | AS67.00-Z-0001-01A |
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1003-20A | Multicutter |
Clamp blade (124 589 40 63 00) into multi-cutter (3)
.
- Moisten whetstone and sharpen blade on both sides with machine switched on.
- Cut out window from outside.
If it is not possible to cut all the way through the glue with the blades available use cutting wire.