LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Windows - 140 Chassis) >> Testing & Repair >> Remove/install rear window - AR67.20-P-2000 >> Remove/install rear window - AR67.20-P-2000D >> Install rear window - AR67.20-P-2000-05D

Install rear window - AR67.20-P-2000-05D

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
WORKSHOP EQUIPMENT

WE58.40-Z-1029-11A Cup suction tool for window removal and installation
  1. Position both suction cups on rear window.
  2. Center rear window above window cutout with second mechanic and position so that strips of tape coincide.
  3. Position rear window on glue bead and press on until it makes contact with rubber spacers.

    IMPORTANT On model 210.02, with tailgate, the window must rest on the cover.

    IMPORTANT Open a crank window in the vehicle so that air is not trapped when the door is closed, thereby pressing the windshield outwards.

    NOTES Install rear window within 10 minutes after applying glue bead before adhesive force of glue starts to decrease

    IMPORTANT Curing time is approx. 1 hour calculated from the time the rear window is installed.

scientia non olet · About LEMON Manuals