Aligning rear window in body opening - AR67.20-P-2000-04D
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TEST AND ADJUSTMENT VALUES FOR REAR WINDOW
| Number | Designation | Model 140 | |
|---|---|---|---|
| BE67.20-P-1001-01B | Distance between top of window and rear edge of roof | Dimension mm "A" | 16 |
| See figure | AR67.20-P-2000-04D | ||
- Before applying glue align rear window in body opening (observe dimension "A", measured between top of window and rear edge of roof).
Ensure that distance from edge of window to clip is sufficient to allow installation of molding without damaging window.
- Apply strips of tape (arrows), cut through at top of window and remove window.
- Remove protective foil from retaining strips.