LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Anti-Theft & Central Locking System - 140 Chassis) >> Basic Knowledge >> Inhibiting remote control key, function - GF80.30-P-3003B

Inhibiting remote control key, function - GF80.30-P-3003B

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 140 as of 1.6.96, 210 / (except 210.081 /281) as of 1.6.96 up to 28.2.97 with CODE (491) USA version 

MODEL 202 as of 1.8.96 up to 31.5.97 with CODE (491) USA version 

When an IR remote control key is lost or stolen it is necessary to desynchronize and disable the affected remote control key with the hand-held tester (HHT) so that it can no longer be used to operate the vehicle. In such a case the remote control and transponder no longer function. The IR remote control function and transponder function are not disabled together. For this reason it is necessary to desynchronize the remote control key in the infrared remote RCL control module with the HHT. Then it is necessary to resynchronize all remote control keys still present.

There are two possibilities for disabling the transponder:

If a mechanical key is lost it is also necessary to disable the transponder.

First determine the number of the remote control key to be disabled (1 through 8). For this purpose the following information can be read out of the infrared DAS control module (N54/1) with the hand-held tester (HHT):

REFER TO BASIC KNOWLEDGE Remote control key with transponder, purpose/design/function   GF80.30-P-4001A 
REFER TO BASIC KNOWLEDGE Infrared drive authorization system (DAS) remote control, purpose/location   GF80.30-P-4003A 
REFER TO BASIC KNOWLEDGE Infrared RCL control module, purpose/location   GF80.30-P-4008A