Removal and installation of control cable for seat fore/aft adjustment - ra91001400147x(0147)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140

Preliminary work:

Driver's seat or front passenger seat removed (Removal and installation of driver's seat or Removal and installation of passenger's seat )

Fig 1: Identifying Control Cable Components - Seat Fore/AFT Adjustment (1 Of 4)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Control Cable Components - Seat Fore/AFT Adjustment (2 Of 4)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Control Cable Components - Seat Fore/AFT Adjustment (3 Of 4)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Control Cable Components - Seat Fore/AFT Adjustment (4 Of 4)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Pin (1) on handle (2)	press out and remove.
Locknut (3)	loosen and unhook control cable at bracket.
Locking device (4)	remove, unhook control cable (5) and remove.
Control cable (5)	reinstall in opposite order and adjust.
Control cable (5)	adjust at adjusting screw (arrow), so that when handle (2) is pulled up to the stop the locking bolts of seat fore and aft adjustment rails are completely disengaged.