Carrying out distance and comparison measurements on rear axle - AR40.30-P-0402-02B

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Test data of distance and comparison measurement on rear axle

Number	Designation			Model 140
BE40.30-P-1001-05A	Dimension	H1	mm	4
		H2	mm	3
		H4	mm	4
		H5	mm	6
		H6	mm	1250±2
		H7	mm	1096±2
		H8	mm	3
		H9	mm	3
		Fig. see		AR40.30-P-0402-02B

Fig 1: Identifying Telescopic Graduated Ruler (124 589 01 19 00)

G05438814

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Telescopic Graduated Ruler (124 589 02 19 00)

G05438815

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Suspension Device (170 589 00 63 00)

G05438816

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Set Of Measuring Adapters (140 589 09 63 00)

G05438817

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 5: Identifying Connecting Parts (124 589 08 63 00)

G05438818

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Comparison dimension "H1 " measured from inspection hole "K " to center of hexagon bolt of rear mounting of thrust strut left to right.
Use measuring tips 140 589 09 63 01 verwenden.

Fig 6: Measuring Dimension Of Inspection Hole And Thrust Strut
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Comparison dimension "H2 " measured from inspection hole "K " to hexagon bolt of front mounting of rear suspension supporting bracket left to right. Unscrew, screw in hexagon bolts as necessary and inspect for twist.
Use measuring pins 140 589 09 63 11.

Fig 7: Measuring Dimension Of Front Mounting And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Comparison dimension "H4 " measured from inspection hole "K " to center of thread of thrust strut at rear suspension supporting bracket left to right.
Use measuring tip 140 589 09 63 02.

Fig 8: Measuring Dimension Of Thrust Strut And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Comparison dimension "H5 " measured from inspection hole "K " to hexagon bolt of rear mounting of rear suspension supporting bracket left to right. Unscrew, screw in hexagon bolts if necessary and inspect for twist.
Use measuring pins 140 589 09 63 11.

Fig 9: Measuring Dimension Of Rear Mounting And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Distance "H6 " measured at the hexagon bolts of the front mounting of the rear suspension supporting bracket.
Use measuring pins 140 589 09 63 11.

Fig 10: Measuring Distance Of Front Mounting And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Distance "H7 " measured at the hexagon bolts of the rear mounting of the rear suspension supporting bracket.
Use measuring pins 140 589 09 63 11.

Fig 11: Measuring Distance Of Rear Mounting And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Comparison dimension "H8 " measured between the hexagon bolts of the front and rear mounting of the rear suspension support in bracket left and right.
Use measuring pins 140 589 09 63 11.

Fig 12: Measuring Dimension Of Rear Mounting And Rear Suspension Support
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Comparison dimension "H9 " measured diagonally between the hexagon bolts of the front and rear mounting of the rear suspension supporting bracket.
Use measuring pins 140 589 09 63 11.

Fig 13: Measuring Dimension Of Rear Mounting And Rear Suspension Supporting Bracket
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.