Removing and installing spring link and replacing rubber mount - AR35.20-P-0114A: Notes
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 140
| Fig. item, etc. | Work instructions | ||
|---|---|---|---|
| Lethal injuries are possible if vehicle slips off of lifting platform | Align vehicle between the four pillars of the hoist and position the four support plates at the hoist mounting points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Replace self-locking nuts | |||
| Removing and installing rear spring | AR32.20-P-0230A | ||
| 6J | Remove shock absorber or suspension strut | from spring link | |
| *BA32.25-P-1002-03B | |||
| *BA32.30-P-1002-01A | |||
| 6 | Spring link | ||
| *BA35.20-P-1001-01A | |||
| *BA35.20-P-1002-01A | |||
| 6B | Spring link rubber mounting | ||
| Remove and install spring link rubber mount | AR35.20-P-0114-01A |
| Number | Designation | Model 140 | |
|---|---|---|---|
| BA32.25-P-1002-03B | Self-locking nut for attaching shock absorber to spring link | Nm | 100 |
| Number | Designation | Model 140 with level control/ADS | |
|---|---|---|---|
| BA32.30-P-1002-01A | Self-locking nut of spring strut of level control/ADS to spring link | Nm | 100 |
| Number | Designation | Model 140 | ||
|---|---|---|---|---|
| BA35.20-P-1001-01A | Self-locking nut, spring link to rear-axle carrier | 1st stage | Nm | 70 |
| 2nd stage | ∠° | - | ||
| BA35.20-P-1002-01A | Self-locking nut, spring link to wheel carrier | Nm | 120 | |