Checking friction torque of ASD differential - AR35.41-P-0560-05C
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TEST VALUES - FRICTION TORQUE OF ASD REAR AXLE CENTER ASSEMBLY
| Number | Designation | Model 124 with 185 mm dia. rear axle center assembly and CODE 211a (ASD) | Model 129 with 185 mm dia. rear axle center assembly and CODE 211a (ASD) | |
|---|---|---|---|---|
| BE35.41-P-1001-01A | Friction torque when complete differential is rotated | Nm | 80 - 160 | 80 -160 |
TEST VALUES - FRICTION TORQUE OF ASD REAR AXLE CENTER ASSEMBLY
| Number | Designation | Model 201 with 185 mm dia. rear axle center assembly and CODE 211a (ASD) | Model 202 with 185 mm dia. rear axle center assembly and CODE 211a (ASD) | |
|---|---|---|---|---|
| BE35.41-P-1001-01A | Friction torque when complete differential is rotated | Nm | 80 - 160 | 80 -160 |
TEST VALUES - FRICTION TORQUE OF ASD REAR AXLE CENTER ASSEMBLY
| Number | Designation | Model 124 with 210 mm dia. rear axle center assembly and CODE 211a (ASD) | Model 129 with 210 mm dia. rear axle center assembly and CODE 211a (ASD) | |
|---|---|---|---|---|
| BE35.41-P-1001-01B | Friction torque when complete differential is rotated | Nm | 80 - 160 | 80 -160 |
TEST VALUES - FRICTION TORQUE OF ASD REAR AXLE CENTER ASSEMBLY
| Number | Designation | Model 140 with 210 mm dia. rear axle center assembly and CODE 211a (ASD) | |
|---|---|---|---|
| BE35.41-P-1001-01B | Friction torque when complete differential is rotated | Nm | 80 - 160 |
Check friction torque .
If the friction torque deviates from the specified value, the friction washers with lining on one side for the differential side gears are to be selected so that the specified value is achieved after assembly.