LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Securing hexagon collared nut on drive pinion joint flange - AR35.31-P-0550-29A

Securing hexagon collared nut on drive pinion joint flange - AR35.31-P-0550-29A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
REFER TO SHOP-MADE TOOLS Chisel for securing collar nut on joint flange WF58.50-P-3531-01A
  1. Using a caulker, peen the hexagon collar nut (40) into one of the two grooves of the drive pinion so that there is no longer a gap between the groove and locking tabs.

NOTES Do not apply heavy axial blows in order to avoid damage.

Fig 1: Identifying Hexagon Collar Nut On Drive Pinion Joint Flange
G04635080Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals