LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26A

Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert one shim (48) on both sides of the spacer sleeve (44) and mount on the drive pinion

    IMPORTANT The spacer sleeve (44) and shims (48)must always be replaced.

    Fig 1: Identifying Shim, Spacer Sleeve And Drive Pinion
    G04636591Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals