LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Installing right locking ring - AR35.31-P-0550-22A

Installing right locking ring - AR35.31-P-0550-22A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1009-02A Pliers for circlip, inner
  1. Insert locking ring (29) marked during removal into the groove using pliers (064) so that the oil hole (arrow) is not blocked.

    IMPORTANT Install the circlip (29) which was previously removed and marked in order to achieve a basic preload of the rear axle housing.

  2. Check that locking ring (29) is correctly seated.
    Fig 1: Installing Right Locking Ring
    G04636564Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals