LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09D

Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09D

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal And Installation Tool (201 589 02 43 00)
G04636427Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Mount removal and installation tool (038) on rear axle housing.
  2. Using thrust piece (038a) part 15, pull the large tapered roller bearing outer race (46b) out of the rear axle housing and remove with shim.
    Fig 2: Pulling Large Tapered Roller Bearing Outer Race Out Of Rear Axle Housing
    G04636428Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  3. Using thrust piece (038b) part 16, press out the small tapered roller bearing outer race (43e) and remove.
  4. Detach removal and installation tool.
    Fig 3: Pressing Out Small Tapered Roller Bearing Outer Race
    G04636429Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals