LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Pressing tapered roller bearing outer races in and out of bearing cover - AR35.31-P-0550-41E

Pressing tapered roller bearing outer races in and out of bearing cover - AR35.31-P-0550-41E

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal And Installation Tool (129 589 02 43 00)
G04635109Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

    Pressing out 

  1. Press out tapered roller bearing outer races with removal tool (030a-b) part 01 and 02.

IMPORTANT

Mark tapered roller bearing outer races.

Fig 2: Pressing Out Tapered Roller Bearing Outer Races
G04635110Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

    Pressing in 

  1. Press new tapered roller bearing outer race into bearing cover (27d) using installation tool (030a, 030c) part 01 and 03.
    Fig 3: Pressing Tapered Roller Bearing Outer Race Into Bearing Cover
    G04635111Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals