LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Loosening and unscrewing twelve-point collar nut on joint flange - AR35.31-P-0550-35C

Loosening and unscrewing twelve-point collar nut on joint flange - AR35.31-P-0550-35C

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Pin Wrench (129 589 01 07 00)
G04635086Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Socket Wrench Bit (126 589 02 09 00)
G04635087Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. SPECIAL TOOL Mount pin wrench (040) on joint flange (41). Slacken twelve-point collar nut using SPECIAL TOOL Socket wrench bit (040a) and remove.

    IMPORTANT Do no remove collar protection when slackening twelve-point collar nut.

    Shown: 185 mm dia. rear axle center assembly 

    Fig 3: Loosening And Unscrewing Twelve-Point Collar Nut On Joint Flange
    G04635088Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals