LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26B

Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26B

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit a bearing washer (48) on both sides of spacer sleeve (44) and slide onto drive pinion.

    IMPORTANT The spacer sleeve (44) and bearing washers (48) should always be replaced with new ones.

    Fig 1: Identifying Spacer Sleeve, Bearing Washer And ABS Gear
    G04636592Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals