LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Clipping thrust washer onto tapered roller bearing inner race - AR35.31-P-0550-37C

Clipping thrust washer onto tapered roller bearing inner race - AR35.31-P-0550-37C

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
REFER TO COMPONENT MODIFICATIONS Integrated thrust washer or tapered roller bearing inner race BT35.31-P-9402-01A 

Clip thrust washer (43a) on tapered roller bearing inner race (43d).

Check retaining clips on tapered roller bearing inner race are properly seated.

IMPORTANT

Replace thrust washer.

Fig 1: Identifying Roller Bearing Inner Race And Thrust Washer
G04635096Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals