Rear axle center assembly with 198 mm diameter crown wheel - BT35.31-P-9406-01A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Rear axle center assembly dia. 198 in MODEL 129.058 /063, 140.02 /03 as of 1.6.94
Crown wheel diameter modified
PRODUCTION BREAKPOINT DATA/MODIFICATIONS/NEW FEATURES
| World-Herst. Code | Typ | LL RL | Prod.-Work | Fg-Ident-End-Nr. off | Fg-Ident-End-Nr. to | Prod.- Period-off | Prod. - Period to | Type and reason of the change | Reference/remark |
|---|---|---|---|---|---|---|---|---|---|
| 129.058 | 01.06.94 | ||||||||
| 129.063 | 01.06.94 | ||||||||
| 140.02 | 01.06.94 | ||||||||
| 140.03 | 01.06.94 |
For weight optimization reasons and due to the use of ASR and ETS, a rear axle center assembly with a 198 mm diameter crown wheel without side bearing covers has been installed.
Previously a rear axle center assembly with a 210 mm diameter crown wheel with side bearing covers has been installed.
To attach the joint flange to the drive pinion a hexagon collared nut has been used instead of a twelve-point collared nut.