Removing and installing language control module switch - AR82.70-P-0002A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 140.### 1A as of 123447, 210 with CODE (813b) Voice activation system (VAS)
Shown on model 140 with cruise control
Shown on model 210 with cruise control
| Removing, installing | |||
| 1 | Connect quiescent current preservation unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground cable of battery | On model 210, |
AR54.10-P-0003A |
| On model 140 | ra54001400003x | ||
| 3 | Remove steering wheel | ||
| 4 | Remove cover below left of instrument panel | On model 140 | ra68001400150x |
| On model 210 | AR68.10-P-1500F | ||
| 5 | Unplug voice activation system (VAS) switch connector (S93/2x1) | ||
| 6 | Unscrew screw (1) | ||
| 7 | Remove voice activation system (VAS) switch (S93/2) from jacket tube | ||
| 8 | Install in reverse order |
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |