Removing and installing radio - ra820e1407502x(7502)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
E. Enabling code Model 140 with MB radio as of 09/93, radio and navigation control module APS
E. Enabling code (Mercedes-Benz radio as of 1 September 93, radio and navigation control module APS)
NOTE:
Enable code input as follows when display is flashing and radio is fully operable.
MB radio, produced by Becker
- Switch on radio.
- Press buttons 1 and 6 or 1 and RDS (classic) simultaneously within 8 seconds after switching on. The word "CODE" appears on the display.
- Enter correct code number.
- Confirm with tune/auto key.
MB Exquisite radio, produced by Panasonic
- Switch on radio.
- Press keys 1 and 6 simultaneously longer than 3 seconds until the word "CODE" appears on display.
- Enter correct code number.
- Confirm tune/auto key.
Radio and navigation control module (APS)
- Switch on unit.
- Press keys 1 and 6 simultaneously within 8 seconds after switching on. The word "CODE" appears on the display.
- Enter correct code number
- Confirm with cursor keys or SCAN key.