LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Electrical System - Body - 140 Chassis) >> Retrofitting & Conversion >> Remove and install infrared interior motion sensor control module (N26/3) - ra82001409840x(9840)

Remove and install infrared interior motion sensor control module (N26/3) - ra82001409840x(9840)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140 

Fig 1: Identifying Infrared Interior Motion Sensor Control Module Components
G05440606Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Trim (1) in right of trunk remove, install.
Screw (arrow) unscrew, screw in.
Infrared interior motion sensor control module (N26/3) remove, install.
Electrical connectors (2-4) unplug, plug in.
NOTE: Perform function check, see Diagnosis Manual Body Volume 2.