Removal and installation of windshield washer nozzles - ra82001400792x(0792)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Model 140
REMOVAL
| Engine hood | open and position vertical. |
| Fastening clips (1) | remove using special tool, part no. 140 589 18 63 00. |
NOTE:
Insert special tool as far as the stop, turn downwards 90° and remove fastening clips.
| Washer nozzles (2) | pull downwards. |
| Washing agent hose (3) | detach. |
| Plug (4) for nozzle heating | detach. |
INSTALLATION
| Washing agent hose (3) | push on. |
| Plug for nozzles heating (4) | plug in. |
| Washer nozzle (2) | insert with the retaining lugs first. |
| Fastening clips (1) | press in up to point of engagement. |
| Engine hood | close. |
| Function check | perform. |
| Adjustment | if required, correct using special tool, part no. 110 589 02 63 00. |
Washer nozzles are basically adjusted by the manufacturer. Note correct location (left, right, central) in accordance with the parts microfiche.
Special tools