LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Electrical System - Body - 140 Chassis) >> Maintenance >> Check and correct headlamp adjustment - AP82.10-P-8260A >> Set low beam - AP82.10-P-8260-01A

Set low beam - AP82.10-P-8260-01A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. When setting the height the light-dark boundary must have the same coverage as the horizontal broken line (4) of the device. When lateral adjustment is taking place, the bent line (5) must lie below the central mark (6) and start at the horizontal division mark (4).
    Fig 1: Identifying Low Beam Measurements
    G04688642Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals