Using fixing mounts and templates - AR68.20-P-2030-02S
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1011-20A | Universal profile milling machine with surface milling cutter (3 single lip miller Ø 5 x 60mm, 2 single lip miller Ø 5 x 90mm, templates, fixing supports for model 129, 170, 202, 208, 210, 463), Firma Fetzer GmbH 75446 Wiernsheim-Pinache |
Top and bottom covers
Covers can only be processed with new clamping and milling table SFT 3/140.
Switch cutouts which can be achieved with spacer frames FD 5/140 and FD 6/140 must be cut out with cutter dia. 5 x 90 mm included with the set. The maximum cutting depth per milling cut should be > 2 mm.
When spacer frame FO 1/140 is used with FD 5/140, it is necessary to clamp the aluminum strips provided between the milling table surface and spacer frame FD 5/140.