Removing and installing mechanical stop lamp switch - AR42.10-P-0040A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODELS 129, 140, 170, 202, 208, 210
| Removing, installing | |||
| 1 | Remove cover below instrument panel | Model 129 | ra68001290150x |
| Model 140 | ra68001400150x | ||
| Model 170 | AR68.10-P-1500G | ||
| Model 202 | AR68.10-P-1500E | ||
| Model 208 | AR68.10-P-1500K | ||
| Model 210 | AR68.10-P-1500F | ||
| 2 | Unplug electrical connector from stop lamp switch (S9) | ||
| 3 | Press catch (S9b) | ||
| 4 | Turn and pull out stop lamp switch (S9), and adjust | Fully depress brake pedal (24), insert stop lamp switch (S9) and turn until catch (S9b) engages. The actuating travel distance is set automatically. |
|
| 5 | Install in the reverse order |