Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) - AR07.03-P-6570E
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 119.97
| Fig. item, etc. | Work instructions | ||
|---|---|---|---|
| Remove fuel rail together with injection valves, install | AR07.03-P-1452E | ||
| O-ring | replace, oil for installing | ||
| 35 | Insulating sleeves | pull out of intake manifold, press in |