Removing and installing hot wire mass air flow sensor - AR07.41-P-1453E
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 119.97
| Item illustration, etc. | Working notes | ||
|---|---|---|---|
| Connector for hot wire mass air flow sensor (B2/2) | Tighten union nut until it catches | ||
| 31 | Connection hose | ||
| 32 | Hose clamp | Loosen, tighten, for this purpose remove vacuum line for brake unit | *WH58.30-Z-1002-06A |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1002-06A | 7 mm socket hexagon on flexible shaft for hose clamps with worm drive |