Removing and installing hot film mass air flow sensor - AR07.07-P-1453E
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 119.981 /982 /985
| Figure/Item, etc | Work instructions | ||
|---|---|---|---|
| Coupling for hot film MAF sensor (B2/5) | Tighten union nut until it engages | ||
| B17 | Intake air temperature sensor | Check O-ring and replace if necessary | |
| 31 | Connecting hose | ||
| 32 | Hose clip | Loosen, tighten | *WH58.30-Z-1002-06A |
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1002-06A | 7 mm socket hexagon on flexible shaft for hose clamps with worm drive |