Replacement of the vacuum unit - ra07016028618x(8618)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Engines 602.96, 603.96/97 TURBO in Models 124, 126, 140, 201
Preceding work:
Charge air pipe removed (14-1310) .
Operation no. of operation texts and work units or standard texts and flat rates: 07-8618
| Screw (6b) | remove, install (use TORX-T30). |
| Bracket (6c) | remove, install. |
| Stop unit (6) | raise slightly when removing, tilt back towards engine and withdraw. |
| O-ring (6a) | remove, install. |
| Emergency stop lever (25) | press when installing and engage connecting rod of vacuum unit into the rocker of the emergency stop lever. |