Bleeding the clutch actuation - AR25.20-P-0070A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 129, 163, 140, 170, 202, 208, 210
| Risk of poisoning due to swallowing brake fluid. Risk of injury due to brake fluid coming into contact with the skin and eyes. | Only pour brake fluid into suitable, appropriately marked containers. Wear protective clothing and safety glasses when handling brake fluid. | AS42.50-Z-0001-01A | |
| Notes on brake fluid | All models | AH42.50-P-0001-01A | |
| 1 | Unscrew cap and connect filling or bleeding unit | Bleeding pressure 2 bar |
*WE58.40-Z-1001-07A |
| 2 | Open bleed valve on slave cylinder | ||
| 3 | Allow brake fluid to escape | ||
| 4 | Disconnect filling or bleeding unit | ||
| 5 | Correct brake fluid left in reservoir | ||
| 6 | Screw on cap | ||
| 7 | Check function of clutch control and check system for leak |
WORKSHOP EQUIPMENT
| WE58.40-Z-1001-07A | Brake fluid replacement unit |