LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Automatic Transmission - 140 Chassis) >> Testing & Repair >> Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200A >> Insert selector valve into driver of detent plate - AR27.19-P-0200-01A

Insert selector valve into driver of detent plate - AR27.19-P-0200-01A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. When inserting electrohydraulic control unit into transmission housing, plastic part of selector valve (10) must engage in driver of detent plate (11).
Fig 1: Identifying Plastic Part Of Selector Valve, Driver Of Detent Plate
G04606549Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals