Screw on and secure twelve-point collared nut and secure - AR27.50-P-0600-04B
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
| Number | Designation | Transmission 722.6 722.9 | |
|---|---|---|---|
| BA27.50-P-1001-01A | Collared nut, output flange to output shaft | NM | 200 |
- Block transmission gear assembly by engaging park pawl.
- Push output flange (48) onto the output shaft.
Transmission 722.611: On this model the output flange is not designed as a three-arm flange, the attachment to the output shaft with the aid of a twelve-point collar nut corresponds to that on the three-arm flange.
- Fasten twelve-point collar nut (47) using the socket wrench bit 126 589 02 09 00.
Replace twelve-point collar nut (47).
- Secure twelve-point collar nut (47) by hammering the collar into the recess in the output shaft. (Arrow)