Adjusting shift rod - AR27.60-P-0980A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 722.5 in MODEL 124, 129, 140
TRANSMISSION 722.3 in MODEL 461, 463
| Adjustment | |||
| The vehicle must be on its wheels for the adjustment work listed in the following. | |||
| 1 | Unhook shift rod (10) on floor selector | ||
| 2 | Move range selector lever (52) into position "N" | ||
| 3 | Loosen lock nut (4) | ||
| 4 | Adjust shift rod (10) | Adjust the length of the shift rod (10) so that there is a play of approx. 1 mm between the selector lever (18) and the "N" stop in the gate plate. | |
| 5 | Hook up shift rod (10) and secure, tighten lock nut |