Steering tandem pump/suspension system ADS location/task/design/function - GF46.30-P-2200A: Notes
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 129 as of 1.9.95 with CODE (216c) adaptive damping system (ADS II) with electronic level control
MODEL 140, 210 with CODE (217a) level control on rear axle with ADS
MODEL 202, 208 with CODE (480) level control on rear axle
| Location | On front side of engine | ||
| Task | Produce different oil pressures and volume flows irrespective of engine speed, for:
|
||
| Design | Two independent oil pumps are driven by one drive shaft for the smallest installation conditions
They are protected from one another by a shear bridge (shear pin or sleeve) |
||
| Power steering pump function | GF46.30-P-2100-01A | ||
| Radial-piston pump function | With level control, ADS | GF46.30-P-2200-01A |